ISO Sensitivity
ISO100to 25600 in steps of1/3 or 1/2EV In P S A and M modes can also be set to approx. 1 or 2 EV (ISO 102400 equivalent; monochrome only) above ISO 25600; auto ISO sensitivity control available
Dust Reduction
Image sensor cleaning Image Dust Off reference data (Capture NX-D software required)
Metering Method
Matrix: 3D color matrix metering II (type G E and D lenses); color matrix metering II (other CPU lenses); color matrix metering available with non-CPU lenses if user provides lens data Center-weighted: Weight of approximately 75% given to 8 mm circle in center of frame. Diameter of circle can be changed to 6 10 or 13 mm or weighting can be based on average of entire frame (non-CPU lenses use 8-mm circle) Spot: Meters circle with diameter of about 3.5 mm (about 2.5% of frame) centered on selected focus point (on center focus point when non-CPU lens is used)
Metering System
TTL exposure metering using 2016-pixel RGB sensor
Supported Languages
Arabic Bengali Bulgarian Chinese (Simplified and Traditional) Czech Danish Dutch English Finnish French German Greek Hindi Hungarian Indonesian Italian Japanese Korean Marathi Norwegian Persian Polish Portuguese (Portugal and Brazil) Romanian Russian Serbian Spanish Swedish Tamil Telugu Thai Turkish Ukrainian Vietnamese
View finder
Eye-level pentaprism single-lens reflex viewfinder
White Balancing
Auto (2 types) incandescent fluorescent (7 types) direct sunlight flash cloudy shade preset manual (up to 6 values can be stored spot white balance measurement available during live view) choose color temperature (2500 K to 10000 K); all with fine-tuning
White Balancing Bracketing
Exposure Flash White balance ADL
HDMI
Type C HDMI connector
Wi-Fi Standard
IEEE 802.11b IEEE 802.11g
Wireless Setup
Supports WPS
Self Timer
2 s 5 s 10 s 20 s; 1 9 exposures at intervals of 0.5 1 2 or 3 s
Operating Environment
Temperature: 0 °C 40 °C (+32 °F 104 °F) Humidity: 85% or less (no condensation)