Cable Type preferred for RS485 (If Long Range) :- Two core, Twisted Pair Shielded type. D+ and D- should be twisted with each other to get optimal range
1 x RS232/TTL to RS485 Converter Module
5 cm x 2.4 cm x 1 cm
RS232/TTL to RS485 (MAX485) Data Converter /Adapter Module | Auto Bi-directional.RS485 to TTL Converter support almost All Digital Microcontroller such as Arduino;8051;PIC;AVR;ARM;MSP430;COP8;STM;Raspberry Pi etc.Hence it is use in Home;office;Long Distance Communication;Industrial Automation IoT Research & Development;DIY Student Project Hobby R&D | (ABOUT RS232/TTL to RS485 (MAX485) Converter) : First of all this is Auto Bi-directional Receive Transmit RS485 to RS232 TTL board for Long distance Network Communication Protocol like Modbus;Profibus;HART;Fieldbus etc.RS485 module interfaces TTL to RS-485. It has Auto Direction control;making it easier to use as RS-232/TTL Serial Interface replacement. RS485 is used for Serial Communications over longer distances therefore we can use twisted pair wire;as a result Twisted pair cable can work up to 1.2 Km distance. And supports multiple units on the same bus (Multi-Drop) due to this it Can have up to 32 devices on the bus. This converter provides two way serial communications signal conversion between the RS485 to and from a TTL. In contrast The converter is designed for office and industrial applications (non-isolated);and provides superior characteristics/features normally found only on more expensive units. | (FEATURES of RS485 to TTL Converter Module) : Ground Output for wire shielding | Transceiver Facility (Automatic Switching between Transmit/Receive modes of RS485) | Twisted Pair cable can work up to 1.2 Km distance | Supports point-to-multi-point;this converter can connect to 32 RS485 interface device | On board 5.08(mm) pitch 3P terminal to facilitate RS-485 communication wiring | Termination Resister Jumper provides option to use in Multi Drop RS485 network | Four mounting holes 3.0 mm for Easy Mounting | (Specification of MAX485 to TTL-RS232 & RS232 TTL to RS485 Bi-directional Converter) : Operating Voltage : +5V With on board RED LED power indication | RS485 I/O : D+;D-;Ground | RS232/TTL I/O : Tx;Rx | Transfer rate : 300-115200BPS | Built in Terminal resistor : 100R Ohm with Jumper (for connect/disconnect) | Working environment : -10 °C to 85 °C | Relative humidity : 5% to 95% | Transmission media : General line;Twisted pair or Shielded cable | Note: Cable Type preferred for RS485 (If Long Range) : Two core;Twisted Pair Shielded type. D+ and D- should be twisted with each other to get optimal range | Package Contains: 1 X RS232/TTL to RS485 Converter Module | Note:Design;color or Parts of the Product may vary as per the Availability | Have any Queries!! Please Contact Us email@example.com or Mytechnocare Website.
Country Of Origin
MY TechnoCare (Plot-58;Kamalbag Soc.-2;Varachha Road;Surat;Guajrat-395006;INDIA)
7 Days Free Return or Replacement - This item is eligible for free replacement/return within 7 days of delivery in an unlikely event of the delivered item being damaged/defective or different from what you had ordered. We may contact you to ascertain the damage or defect in the product prior to issuing refund/replacement. Cancellation Allowed.